Parts2O FPW217-180B Tank Float Switch
- Turns a pump on when the aerator tank is empty
- Piggyback plug for system troubleshooting and manual operation
- Normally-closed contacts
- Plastic design provides durability
- Piggyback plug for simple electrical connection
- Durable plastic design
- Allows for manual operation
Features:
Float Switch w / 10 ft. (3 Meter) Cable, Water Tank, Sump Pump (5 Year Warranty)
- 3 Meters (10 feet) of cable, with adjustable counterweight
- Normally open and normally closed (empty and fill) operations.
- Rated up to 250 volts operations at up to 13 Amps or 1/2 HP
- 5 Year Warranty
- Temperature ratings from 32F to 140F, and rated to IP68, with CE & IEC approvals
Features:
Baomain 4M Cable Float Switch Water Level Controller for Tank Pump
- Product Name: Float Switch Water Level Controller; Model: UK-221
- Rated Current/Voltage: AC 10(8A) 250V~10(4A) 380V; Recommended Voltage: DC 24V
- Working Temperature: 0°C~60°C; Control Range: 0.2m; Electrical Endurance: 50,000 times Contacts: NO+NC
- Shape: Round; Cable Length : 4m / 13.1ft; Body Size: 10 x 8 x 4.5cm / 3.9″ x 3.1″ x 1.8″(L*W*T)
- Net Weight : 742g; Package Content : 1 x Float Switch Water Level Controller
Features:
Square D by Schneider Electric 9036DG2 Commercial Open Tank Float Switch, Nema 1, Contacts Close On Rise, 3-1/2″
- Commercial open tank float switch activates pumps or signals within a power circuit when fluid levels are reached
- Works with water, hydraulic oils, and corrosive fluids
- Includes 4 screw terminals and 3 knockouts for 1/2″ conduit entry
- NEMA 1 enclosure protection
- Contacts close on liquid rise
Features:
Elecall 4″Float Switch Stainless Steel Tank Water Level Sensor 110V ES10010 Wire Length 12inch
- Product Name : Water Level Sensor;Stainless steel Material;Contacts : NO+NC;Max Contact Rating : 10W
- It does not have a complex circuit,will not be disturbed,as long as the material selection,liquid,pressure or temperture can be used in any environment.
- This float switch is a device used to sense the level of liquid within a tank,the switch may activate a pump,an indicator,an alarm,or other device,but need to be used with relay
- The float level switch is widely used in electronic,electrical,chemical,water treatment,drainage and other walks of life level control and alarm. Material:Stainless Steel. Alternating current: 223v.
- The versatility of this vertically monted sensor means that it can be installed either at the top or base of your tank,depending on whether you wish to detect the water’s rise or fall.
Features:
Raybend Tether Float Switch
- Universal replacement for most tether switch applications
- Suitable for use with Sump, Sewage or Effluent Pumps.
- 10 foot power cord with piggyback plug for ease of installation
- Rated for up to 15 amps
- Includes hose clamp and cord grip for easy installation onto the pump’s discharge pipe
Features:
TEMCo Float Switch for Sump Pump & Water Level NO/NC Control Function 13ft Cord 5 Year Warranty CN0359
- Dual Function (Fill or Empty) Operation. See Circuit Diagram in Gallery.
- 13 FT cord with adjustable counterweight accommodates most applications.
- 16 Amp max, 120/220 VAC rated. Works on most 1/2 HP or smaller pumps. Usable for potable water.
- Features a reliable high quality German-made Cherry brand switch. IP68 rating. Polypropylene plastic casing, neoprene rubber cord.
- 5 year Guarantee against any manufacturing defects. 1 year no-questions-asked return policy.
Features:
Gikfun M8 Liquid Level Sensor Fish Tank Water Float Switch PP Plastic Ball Float Controller DIY Kit for Arduino EK1373x3
- Float Ball Material: PP; Float Body Material: PP, the electrical life: can reach more than 1 million times.
- Cable Length: 30cm, Float Ball Size(Approx): 19×16.5mm, Total Length: 45mm / 1.77″, Temperature Rating: -20 ~ +80 C
- The switch has the advantages of high sensitivity and durability. PP material is environmentally friendly and has excellent acid and alkali resistance.
- The switch has the advantages of light weight, simple working principle and low price.
- The product is widely used in various liquid level control applications, and can be used in water dispensers, water heaters, humidifiers, bathroom equipment, etc.
Features:
Nxtop 10M Cable Float Switch Water Level Controller for Sump Pump, Water Tank
- Float Switch Water Level Controller with 10 Meters (32 feet) cable; Rated Current/Voltage: AC 10(8A) 250V~10(4A) 380V; Recommended Voltage: DC 24V
- If you need to extend the wire, be very careful to seal tight the wire splice if it’s gonna be underwater.
- Working Temperature: 0°C~60°C; Control Range: 0.2m; Electrical Endurance: 50,000 times Contacts: NO+NC
- The float switch can be used for an in-let flow of water and out-let flow of water from the tank to controlled the level of water, it works in both ways.
- As the liquid level reaches upper or lower switching value, the controller contact will send out signals.
Features:
1/2″ PT Male Balanced 304 Stainless Steel High Pressure Float Ball Valve, Tank Mount, Adjusted water level
- Balance pressure between piston and Valve, as well as smaller ball and shorter level can bear high pressure.
- Adjustable water level. Ball valve is used in pipelines to cut off, distribute and change the flow direction of the medium Widely used in magnetic level switch and liquid level measurements.
- Made of 304 stainless steel. Its applicable medium is water, can withstand wide temperature of -10℃ to 120℃
- Stainless Steel Rod for Float Valve, 1/4″ Diameter, 6.3″ Length, and 4″ Stainless Steel Float
- If you want to control other liquid, you can tell us.
Features:
As an Amazon Associate I earn from qualifying purchases.
